Tools Level Laser Level Klein Tools 93lcls ls16782104 In Black Case NONE
Tools Saw Circular Dewalt Dcs570
With 1 5AH Battery, 1 1.5AH Battery, dewalt 20V Impact Drill dcf885 and Charger.
Tools Generator
Honda EU3000IS 3000 Watt Generator
DC Output Volts / Amps 12 / 8.3
Common Duplex Receptacle Specifications 23.3 amps/120 VAC continuous is available as combined total from these two AC receptacles. Maximum of 20 amps is available from a single receptacle.
DC Receptacle Specifications 8.3 amps/12 VDC is available from this receptacle. Important Note: AC and DC output cannot be used simultaneously. DC system uses floating N (Neutral) type.
Tools Drill Hammer dewalt d25133
in original case with 14 drill bits
Tools Welding Mig Welder
Lincoln Mig 140
Features
Lincoln Electric MIG Pak 140 Wire Feed Welder is 120V; 30-140A
Metal thickness: 24-gauge to 5/16\"
Duty-cycle: 20% at 90A
Wire feed speed: 50-500 inches per minute
MIG and Flux-core ready, includes everything needed to MIG or Flux-core weld
Heavy-duty wire drive motor
No hassle tool-less design for wire spool mounting, wire drive service and polarity changes
Includes welding gun and cable, ground clamp and cable
Tools Drill Electric mastercraft 054-2951-6
Hammer Drill with bit set
in original blue case
Mastercraft Corded Hammer Drill Kit includes corded hammer drill
Variable speeds 0-2,600 rpm/0-46,800 bpm
Select button for drilling or hammer drilling
Convenient storage case with 100 accessories
6A
Tools Wrench Gearwrench 9 pc set
9 pc set including 18mm, 16mm, 15mm, 14mm, 13mm, 12mm, 10mm, 8mm, 6mm
GearWrench 12 Point Open End Ratcheting Combination Wrench Set is manufactured from alloy steel for better strength and durability
Open end quickly ratchet nuts and bolts without removing the wrench from the fastener
72-tooth ratcheting box end only needs a minimal 5° to move fasteners, compared to 30° for standard wrenches
Off-corner loading design on box end provides better grip and reduces fastener rounding
Bright, full polish chrome finish easily wipes clean and resists corrosion
Included rack for storage and organization
Tools Nailgun paslode im325xp
with charger and battery and 2 fuel cells in an orange case
FEATURES
15% Added Power- Drives nails flush, even in LVL and the harder woods remodelers encounter.
Keeps working in temperatures down to 14°F when used with the Paslode Framing Fuel with All-Season Formula.
Lightweight – 7.2lbs. for better comfort and control while working overhead or in tight spaces.
7V Li-ion Battery – Now has 50% longer run-time for up to 9,000 nails per charge.
Fewer jams and misfires when used with Paslode Framing Nails that has the precise nail strip collation matched to the nailer.
SPECIFICATIONS
MODEL IM325XP
PART #905800
WEIGHT 7.2 lbs.
HEIGHT 14.5”
LENGTH 12"
WIDTH 4"
SPEED 2-3 nails per second
MAGAZINE CAPACITY 1 Strip (40 nails)
FASTENER LENGTH 2" - 3-1/4"
FASTENER DIAMETER RANGE .113 - .131" in shank diameters
NAIL ANGLE 30° Paper-Tape
NAIL TYPE Paslode Roun Drive Offset Full Head (Brite or GalvGuard)
FUEL TYPE Framing Fuel with All-Season Formula
NAILS PER FUEL CELL Up to 1200
BATTERY LIFE Up to 9000 nails per charge
Nailer Tools-Air Paslode Lite HP-100
In Black Case With Nails And Work Glasses
Tools Wrecking / Prybars STANLEY FUBAR III 35-120
Features
30" (76 cm) Fubar 3 is a 4-in-1 tool for heavy duty prying, splitting, board bending and striking jobs
Its unique design and shape make nail pulling easier
Light weight, sharpened bar for scraping material
One piece forged steel for durability
Textured grip for excellent grip, comfort and control
Heat treated and tempered striking face